CATParts Direct← Home
Home › Parts Knowledge › 725C / 730 Articulated Truck Parts

CAT 725C / 730 Articulated Truck Parts - Driveline, Cylinder and Cooling Wear List for Middle East 2026

Quick answer: 725C and 730 articulated trucks are the standard earthmoving haulers on Middle East infrastructure, quarry and mega-project sites across Saudi Arabia, the UAE, Qatar, Oman and Kuwait. Sustained high load on abrasive haul roads in 45 degree heat produces a stable failure order: drive shaft crosses and universal joints wear first, then hoist and steering cylinders leak internally, then cooling packs lose capacity, and finally seal kits and hub joints close the list. Judge with three on-site signals: driveline vibration under load, hoist drift and cylinder weeping, and oil versus water temperature gap. Send the machine serial number: 725C and 730 share the platform but driveline and cylinder dimensions differ by serial break.
CAT 730 articulated truck drive shaft cross 576-6277
Drive shaft cross 576-6277 (with 9P-0356) for CAT 730 articulated trucks

Why Middle East haul roads wear drivelines and cylinders first

725C and 730 trucks in the Gulf run bulk earthmoving for new cities and industrial zones, quarry feed to crushers, and aggregate delivery to ready-mix plants. Haul roads are abrasive, ambient temperature regularly passes 45 degrees Celsius, and machines work long shifts. The chain is predictable: driveline joints run hot and dry out, hoist and steering cylinder seals harden, cooling packs clog with fine sand, and hub seals and joint hardware take over. Replacing cylinders without solving cooling and contamination repeats the failure after a few thousand hours.

SystemTypical symptomFree first checkUsual action
Drive shaft crossVibration under load, clunk on reversalJoint play and grease conditionReplace cross and rebalance shaft
Hoist and steering cylindersHoist drift, slow steer, external weepingStatic drop test and rod inspectionReseal or replace cylinder
Cooling packHigh water and oil temperatureExternal fin blockage and delta testWash pack, then replace core
Seal repair kitsWeeping at hubs and jointsOil trace and level trendInstall seal kit and inspect surface
Hub and joint hardwarePlay, noise, fastener looseningVisual play and torque checkReplace hardware and re-torque

Drive shaft cross 576-6277: vibration under load is the first clue

576-6277 drive shaft cross (with 9P-0356, group 5766277) is listed for CAT 730 articulated trucks and also appears with 228-1028 in wider CAT applications. Its wear shows up as vibration that increases with load and a clunk when reversing direction, long before any visible damage appears.

Check joint play by hand and inspect grease condition before ordering. If play is present, replace the cross and check the yoke ears for elongation; fitting a new cross into an elongated yoke will not hold.

Hydraulic cylinder 625-5907: static drop test before resealing

625-5907 hydraulic cylinder (group 625-5908, 6255907) is listed for CAT 730 applications. Hoist cylinders in hot climates fail by seal hardening and internal bypass, which shows up as drift rather than as a visible leak.

Run a static drop test with a rated load, then inspect the rod for scoring. Rod scoring means a full cylinder replacement rather than a reseal, and resealing a scored rod wastes the seal kit.

CAT 730 articulated truck hydraulic cylinder 625-5907
Hydraulic cylinder 625-5907 and 625-5908 for CAT 730 articulated trucks

Seal kit 575-0709 and cooling pack 236-0469

575-0709 seal repair kit covers off-highway and mining applications on the 725C and 730 platforms. It is the cheapest insurance on the machine: hub and joint weeping left alone leads to oil loss, contamination ingress and bearing damage that costs far more than the kit.

236-0469 radiator combines charge air cooler, aftercooler and oil cooler functions for the CAT 730. Fine Gulf sand packs into the fins, so the first fix is always an external wash followed by a temperature delta test. Only condemn the core after fan drive and bypass valve checks.

CAT 730 articulated truck radiator and charge air cooler 236-0469
Radiator, charge air cooler, aftercooler and oil cooler 236-0469 for CAT 730

Matched parts 219-7364 for the 725 and 730 platform

219-7364 (with 140-7633) is listed for both CAT 725 and 730 applications, which makes it a practical stocking item for mixed fleets. Because the two models share much of the driveline and body hardware, fleets running both sizes can consolidate part of their inventory, provided each item is verified by serial number.

Verification always starts from the machine serial plate. Send a photo of the serial plate and the old part nameplate and fitment is confirmed the same day, which avoids the costly mistake of fitting a 725 part into a 730 assembly or the other way around.

Shipping, documents and packing to the Middle East

Stock parts leave the warehouse the same day. Express air freight to Riyadh, Dammam, Dubai, Doha and Muscat normally takes 5 to 9 working days. Heavy assemblies travel by sea container to Jebel Ali, Dammam or Sohar with schedules confirmed per port. Export packing uses fumigation-free pallets and wooden cases with machined faces individually protected; packing lists, part photos and loading video are provided before dispatch.

A quotation needs only three things: a photo of the machine serial plate, a photo of the old part nameplate, and a note of the mounting position. With all three we confirm fitment and reserve stock the same day.

Frequently Asked Questions

Do 725C and 730 share the same driveline and cylinder parts?

Partly. Several items such as 219-7364 are listed for both models, but cross dimensions, cylinder bores and cooling cores change with serial breaks. Verify each item by machine serial number before ordering for a mixed fleet.

Hoist drift: reseal or replace the cylinder?

Run a static drop test with a rated load first and inspect the rod for scoring. Clean rod and confirmed internal bypass means a reseal of 625-5907; rod scoring means a full cylinder replacement.

High water temperature in Gulf conditions: is the radiator finished?

Wash the pack externally first and re-measure the temperature delta. Fine sand in the fins of 236-0469 is the most common cause. Check fan drive and the bypass valve before replacing the core.

How long does delivery to the Middle East take?

Stock parts ship the same day and reach Riyadh, Dammam, Dubai, Doha and Muscat in roughly 5 to 9 working days by express air freight. Heavy assemblies go by sea container to Jebel Ali, Dammam or Sohar.

Need 725C or 730 articulated truck parts pricing?

Send the machine serial number and a photo of the old part number and we confirm fitment the same day.

Request a Quote
Scan the WhatsApp QR code for a quote

WhatsApp +86 139 2519 9399 · Scan to send the part number, or open the chat directly