
Most South American copper operations sit between 2500 and 4500 metres. Thin air reduces cooling capacity on its own, and long loaded descents plus continuous haul cycles push the cooling system past its design margin. The typical chain is: charge air temperature rises, engine derates, cycle times stretch, oil and coolant temperatures follow, cylinder and turbo wear accelerates.
| System | Typical symptom | First free check | Usual action |
|---|---|---|---|
| Charge air cooler | High intake temp, derate, smoke | Intake temp versus ambient, external fins | Clean externally, then replace core |
| Hydraulic radiator | High hydraulic temp, slow hoist | Inlet outlet temperature difference | Replace radiator 348-8094 |
| Hoist cylinder | Bed drift, slow raise, external leak | Drift measurement, rod scoring | Reseal or replace cylinder 224-1176 |
| Turbocharger | Low boost, power loss | Boost versus spec, hose condition | Replace turbo 333-2813 |
| Engine radiator | Coolant temp high, top-up rising | Monthly top-up log, pressure test | Replace radiator 332-4567 |
The 350-1820 charge air cooler serves 740B and 735B off highway trucks. On haul roads the most common cause of rising intake temperature is not a failed core but external fin blockage from ore dust and diesel soot.
Fix the order every time: external cleaning and re-measure, then fan drive check, then internal restriction test, and only then a new core. Skipping the cleaning step is the most expensive mistake fleets make on this part.

The 348-8094 radiator handles hydraulic oil heat on 740B and 735B haulers, while the 332-4567 radiator is the engine coolant unit for the same machines. They fail for different reasons and should not be judged together.
Hydraulic radiator problems show as slow hoist and high hydraulic temperature; engine radiator problems show as coolant temperature and top-up volume. Keeping two separate monthly logs lets you catch both weeks before a roadside failure.

The 224-1176 hydraulic cylinder is the four stage telescopic hoist cylinder for 740B and 740C. The field test that decides reseal versus replacement is drift under a loaded bed combined with rod surface condition.
If drift is within limits and the rod is clean, a seal kit is enough. If the rod has longitudinal scoring, only a full assembly solves it, because new seals will be cut within weeks.

The 333-2813 turbocharger (with 362-0853) is listed for 740B. At altitude the engine has less margin, so a small intake leak or a partially blocked cooler produces a much bigger power loss than at sea level.
Check in this order: boost against specification at rated speed, intake hose and clamp condition, charge air cooler restriction, then shaft play. Replace the turbo only when the last check fails, and always fix the intake path at the same time.

Stock parts leave the warehouse the same day. Express air freight reaches Santiago, Lima and Sao Paulo typically in 6 to 10 working days. Heavy cores, radiators and cylinders ship by LCL or FCL sea freight confirmed against Valparaiso, Callao or Santos. Export packing uses heat treated or fumigation free pallets with machined faces protected separately; packing list, product photos and loading video are provided before dispatch.
A quotation needs three items only: machine serial number photo, old part nameplate photo and installation position. With those three we confirm fitment and lock stock the same day.
No. Cooling cores, radiators and cylinders differ by machine serial number even within the same model. Send the serial number and a photo of the old part nameplate and we verify fitment before shipping.
Not necessarily. Clean the fins externally and re-measure first; ore dust blockage is the most common cause. If temperatures stay high, check fan drive and pressure cap before ordering radiator 332-4567 or 348-8094.
Decide on drift and rod condition. If bed drift is within limits and the rod surface is clean, a seal kit is enough. Longitudinal scoring on the rod of cylinder 224-1176 means a full assembly is required.
Stock parts ship the same day and reach Santiago, Lima and Sao Paulo in about 6 to 10 working days by express air. Heavy cores go by sea LCL or FCL, confirmed by destination port, with packing list and loading photos before dispatch.
Send the machine serial number and a photo of the old part label. We confirm fitment and lock stock the same day.

WhatsApp +86 139 2519 9399 · Scan to send your part number, oropen the chat directly