
In Saudi Arabia, the UAE, Qatar, Oman and Kuwait, ambient temperatures above 45 C are normal for months, and the 938M and 950 GC typically run aggregate loading, port handling, stockpile feeding and site clearing. The hydraulic system carries the whole load, and once cooling capacity drops, oil temperature climbs, the pump loses volumetric efficiency, and cylinder seals harden in quick succession.
| System | Early symptom | Free first check | Usual action |
|---|---|---|---|
| Fan motor | High oil temperature, slow fan speed | Case drain flow and relief pressure | Replace fan motor 2466152 |
| Piston pump | Slow boom and tilt, drifting bucket | Case drain flow and charge pressure | Overhaul or replace 3678077 |
| Lift and tilt cylinders | Drift, external seepage, slow cycle | Rod scoring and drift test | Replace cylinder 347-3853 |
| Controller pedal | Dead pedal feel, delayed response | Pedal output signal and linkage play | Replace pedal assembly 623-5451 |
| Injector assembly | Hard start, smoke, fuel consumption up | Rail pressure deviation and cut-out test | Replace injector 196-4229 |
The 2466152 hydraulic fan motor is a 26.00 cc gear motor listed for the 950 GC. When it wears, fan speed falls, oil temperature climbs, and every other component in the circuit ages faster. Two free checks settle the diagnosis: case drain flow, which rises as the motor wears, and relief pressure, which must be verified before blaming the motor.
Before fitting a new motor, clean the cooler core. A core packed with Gulf dust produces the same high oil temperature as a failed motor, and the new motor will be blamed for a problem it did not cause.

The 3678077 piston pump is listed for the CAT 950 GC wheel loader. It loses volumetric efficiency gradually: cycle times lengthen, the bucket drifts, and the machine feels soft under combined movements. The free checks are case drain flow, charge pressure and a drift test on the lift circuit.
Replacing the pump without cleaning the reservoir, lines and filters is a waste of money. If the old pump produced debris, the remaining particles will score the new unit within hours.
The 347-3853 hydraulic cylinder (with 495-6000) is listed for the 938K and 938M. Judge it on rod condition and drift, not on appearance: light rod scoring and seal seepage is a reseal, deep scoring or a bent rod is a replacement.
The 623-5451 controller pedal assembly is listed for the 950 GC and 966 GC. A soft or unresponsive pedal often gets blamed on the pump; check pedal output signal and linkage play first because the pedal is a fraction of the price.

The 196-4229 injector assembly is listed for the 950 GC and 323D2 loader diesel engine. A hard start with visible smoke is not automatically an injector problem: read actual versus target rail pressure first. Deviation at crank and idle points to supply side; a single weak cylinder after a cut-out test points to the injector.
Fuel quality varies across the region. Fit new filters with any injector work and keep a simple fuel sample log - it is the cheapest early warning available.
Stock parts ship the same day. Express air freight reaches Dubai, Riyadh, Doha and Muscat in about 5 to 9 working days. Cylinders, pumps and motors are heavy and normally travel by sea consolidated container or full container, scheduled by destination port, with packing lists, warehouse photos and loading video supplied before dispatch.
To quote we need the machine serial number including suffix, a photo of the old part nameplate, and the installation position. With those three we confirm fitment and lock stock the same day.
Only partially. The cylinder 347-3853 is listed for 938K and 938M, while the piston pump 3678077 and fan motor 2466152 are 950 GC references. Always confirm by machine serial number and suffix before ordering.
Clean the cooler first. A core packed with fine dust produces exactly the same symptom as a worn motor. If temperature stays high, check case drain flow on 2466152 and verify relief pressure before replacing it.
Measure before you buy. Case drain flow, charge pressure and a lift circuit drift test tell you whether 3678077 is worn or the problem is elsewhere in the circuit. Replace filters and clean the reservoir with any pump work.
Stock parts leave the same day and reach Dubai, Riyadh, Doha and Muscat in about 5 to 9 working days by express air freight. Heavy units go by sea consolidated or full container, scheduled by destination port.
Send the machine serial number with suffix and a photo of the old part nameplate, we confirm fitment and lock stock the same day.

WhatsApp +86 139 2519 9399 · Scan and send your part number, or open the chat directly