| Cluster | Parts | Early warning | First test |
|---|---|---|---|
| Implement hydraulics | Main pump, piston pump, control valve | Functions get slower month by month | Pressure and case drain flow at rated rpm |
| Fuel system | Unit injectors, transfer pump, filters | Hard start, grey smoke, rising fuel use | Cut-out test plus injector return flow |
| Cooling group | Fan motor, hydraulic fan pump, radiator | Temperature climbs in heavy duty | Check fan speed and radiator fin blockage |
| Linkage | Pin kits, bushings, bores | Sloppy bucket, knocking | Pry the pin joints with the bucket loaded |

Send the machine serial number, a photo of the machine plate, the stamped number on the old part and — for injectors — the trim code. We confirm fitment, quote the exact line item with stock status, and provide warehouse photos before you commit. Nothing ships until you have matched those photos against what you need.
Injectors, seal kits and small hydraulic parts go by courier. Pumps, motors and structural pieces are crated with machined faces protected separately. Each shipment includes a packing list with per-piece dimensions and weights, plus a loading video before departure. Because inland freight often costs more than the ocean leg in South America, consolidating several lines into one container usually makes the biggest difference to landed cost.
A few categories overlap, but the two machines sit in different engine and hydraulic classes. Always confirm against the serial number rather than assuming commonality — especially for pumps and injectors.
Test in order: fuel supply and filters first, then injector return flow and a cut-out test. A restricted filter or a weak transfer pump looks exactly like worn injectors and costs far less to fix.
Check fan speed first, then fin blockage. A tired hydraulic fan motor is the most common cause of temperature climbing only under load, and replacing a radiator will not fix it.
Yes. Send the trim code from the injector you are replacing and we will match it. Ordering without a trim code is the most common source of injector-related comebacks.
Send the serial number and the old part number — we confirm stock and send photos the same day.

WhatsApp +86 139 2519 9399 · Scan and send your part number, or open the chat directly