
Both machines cover the middle of the dozer range: big enough for production pushing, small enough to transport between sites without special permits. That combination keeps them in fleets well past the point where larger machines are sold on, which is exactly why parts availability matters more than purchase price on these models.
Long service life changes the failure profile. The engine and drive train tend to survive; what fails is everything exposed to heat, dust and vibration — the cooling cores, the turbo, and the undercarriage.
| System | Typical symptom | First field check | Usual fix |
|---|---|---|---|
| Radiator | High coolant temp, derating | Measure inlet/outlet delta T | Core replacement |
| Aftercooler / CAC | Power loss, black smoke | Inspect fins and pressure drop | Core replacement |
| Turbocharger (D7E) | Whistle, oil consumption, low boost | Check shaft play and boost pressure | Turbo or cartridge |
| Undercarriage | Track throws, uneven wear | Measure pitch and bushing wear | Chain, pins and bushings |
| Hydraulic filtration | Slow blade response | Check bypass indicator and filter | Filter element |
A dozer works nose-down in dust for most of its life. The radiator and aftercooler cores clog externally, the fan cannot pull enough air, and the machine derates. Operators usually report it as a power problem, which sends people toward the engine and the turbo. Clean and pressure-test the cores first — it is free and it resolves a large share of cases.
On the D6N we supply 388-5240 radiator and 388-5241 aftercooler, typically ordered together with the 329-1163 variant checked against the serial number. Replacing one core and leaving a partly blocked sibling core is the most common reason a cooling repair does not hold.
Turbo failure on the D7E is usually preceded by a measurable sign: shaft play, oil in the intake, or boost below specification. Catch it at that stage and a cartridge or a turbo is enough. Run it to failure and metal debris travels through the aftercooler and into the intake, turning a single-part repair into a multi-part one.

We supply 315-6171 turbocharger for the D7E. Before release we confirm the engine serial prefix, because the turbo specification follows the engine arrangement rather than the machine model.
Undercarriage is the largest single running cost on any dozer, and it is also the most predictable. Measure pitch extension and bushing wear at fixed intervals and you can plan the rebuild instead of reacting to a thrown track. The mistake that costs the most is replacing only the chain: worn pins and bushings will destroy a new chain in a few hundred hours.
We supply 565-4419 track chain for the D6R and D6N range, with 424-0843 as the companion part, and the pin assembly 266-4761 for the linkage side. Ordered as a set, these hold their wear life; ordered individually, they do not.
The hydraulic filter element is a few percent of the cost of a pump and it is the difference between a pump that lasts and one that does not. A blocked element opens the bypass valve and circulates unfiltered oil, which is how pump and valve wear actually starts.

We stock 1R-0777 filter element for the D6R, D7R and D6N range. Alongside it, the fuel injector 178-6342 (with 10R-1257) is the common rail item most often needed on these engines.
Stock items ship the same day. International express reaches most European destinations in 5 to 10 working days; heavy undercarriage and cooling assemblies travel by sea, consolidated or full container, with transit confirmed against the destination port.
Shipments are packed in wooden cases or heat-treated pallets and strapped. We provide a packing list, commercial invoice and part number list, and we can support origin documentation where required. To quote we need the machine PIN, the old part number and the mounting position.
No. Part 388-5240 covers the main D6N range with 329-1163 as a companion variant, but the core specification follows the engine arrangement. Match on the machine PIN and the old part number before ordering.
Check the cooling cores first. A clogged radiator or aftercooler causes derating that operators report as power loss. Cleaning and pressure-testing the cores is free and resolves a large share of these cases.
You can, but it is false economy. Worn pins and bushings will destroy a new chain in a few hundred hours. Order the chain, pins and bushings as a set so the wear life holds.
Stock items ship the same day and reach most European destinations in 5 to 10 working days. Heavy undercarriage and cooling assemblies go by sea, consolidated or full container, with transit confirmed against the destination port.
Send the machine PIN and the old part number — we confirm fitment and stock the same day.

WhatsApp +86 139 2519 9399 · Scan to send your part number, oropen the chat directly